User Manual
Item Part No. Qty. Description Of Part
3 4 8652-1144 2 CLAM P
3 5 9108-1387 2 TUBE SUPPORT
3 6 8820-1035 4 HEX HD CAPSCREW, 3/8-16X1,
GR5
37 9020-2343 4 TUBE CLAMP
3 8 8820-1036 4 HEX HD CAPSCREW, 3/8-16X1-1/4,
GR5
39 Ref WHEEL DRIVE ASSY, (see page
6-17 for details)
4 0 8850-1110 2 HEAVY HEX JAM NUT, 5/8-11
4 1 9112-0003 1 STEERING KNUCKLE, L.H.
9112-0004 1 STEERING KNUCKLE, R.H.
42 9104-1403 4 MODIFIED WASHER
4 3 9104-3222 4 CAPSCREW, 12PT. HD,3/4-10X2,
GR8, (lubricate and torque to
270-290 ft.lbs.)
4 4 8668-1572 1 2 HARDENED WASHER, 3/4
4 5 8320-1006 1 2 HEX HD CAPSCREW, 3/4-10X2, GR8,
(lubricate and torque to
270-290 ft. lbs.)
4 6 8821-2321 2 SOCKET HD CAPSCREW,
5/8-11X3-3/4,GR8
4 7 8858-1323 2 RETAINING RING
4 8 9114-1424 2 LOWER KING PIN
4 9 8855-1153 2 LOCKWASHER, 5/8, (hi-collar)
5 0 8821-2321 2 SOCKET HEAD CAPSCREW,
5/8-11X3-3/4, GR8
5 1 9104-1450 4 SHIM, (.0478 thick, use as required )
9104-1449 4 SHIM, (.060 thick, use as required)
9104-1451 6 SHIM, (.106 thick, use as required)
9104-1596 4 SHIM, (20 gauge, use as required)
5 2 9112-3029 2 O-RING
5 3 8859-1104 2 O-RING
5 4 9112-1091 2 THRUST BEARING
5 5 8867-1001 2 LUBE FITTING, STRAIGHT, 1/8
5 6 9108-6083 1 TIE ROD ASSY, (includes item 57)
5 7 9104-3247 2 SELF-ALIGNING BUSH
5 8 9104-1439 2 TIE ROD PIN
5 9 8852-1306 2 HEX LOCKNUT, 3/8-16
6 0 8624-1716 2 HEX HD CAPSCREW, 3/8-16X3, GR8
6 1 2460-1570 2 LIP SEAL
62 9112-1239 2 BUSHING
63 9112-1240 4 BUSHING
2-5
OLD STYLE
PIVOT PIN
Item Part No. Qty. Description Of Part
9103-5240 1 STEERING KNUCKLE KIT, (includes
items 2 & 3, four of item 5, items 19
thru 23, 25, 26, 27, 46 thru 54, 62, 63,
& 64), (one kit will do both sides)
9104-5152 AR STEERING CYLINDER PIN KIT,
(includes one each of items 24 thru
30, one kit needed for each side)
1 9108-6082 1 REAR AXLE WELDMENT, (includes
items 2 thru 4)
2 9112-3028 2 FRAME UPPER BUSHING
3 9112-3027 2 FRAME LOWER BUSHING
4 9112-3031 2 FRAME AXLE PIN BUSHING
5 8867-1022 6 LUBE FITTING,90 DEGREES, 1/8
6 8820-1065 2 HEX HD CAPSCREW,1/2-13X1,GR5
7 8855-1013 2 LOCKWASHER, 1/2
8 9108-1461 2 WASHER
9 9108-1384 2 STEERING CYLINDER PIVOT PIN
1 0 9020-1918 2 WASHER
1 1 8822-1701 2 SOCKET SET SCREW,3/8-16X1/2,
SELF-LOCKING, (cup point)
1 2 9002-0247 2 HEX HD CAPSCREW
1 3 9103-1440 1 AXLE MOUNTING PIN
1 4 8856-1119 1 FLAT WASHER, 1-1/4
1 5 8510-1098 1 HEX NUT
1 6 9020-6846 AR SHIM, (1/8 thick)
1 7 9103-1009 AR SHIM, (1/4 thick)
1 8 9002-2234 1 HEX LOCKNUT
1 9 9112-3030 4 BACK-UP RING
2 0 8859-1032 4 O-RING
2 1 8692-1268 2 LIP SEAL
2 2 8821-1117 2 SOCKET HD CAPSCREW,
1/2-13X4-1/2, GR8
2 3 9108-1693 2 UPPER KING PIN
2 4 8852-1312 2 HEX LOCKNUT, 3/4-10
2 5 9108-1415 2 DIRT SHIELD
2 6 9104-1438 2 SPACER
2 7 8859-1105 2 O-RING
2 8 9104-1481 2 STEERING CYLINDER PIN
2 9 9104-1459 2 WASHER
3 0 8850-1416 2 HEX JAM NUT, 1-14, (lubricate &
torque to 570-620 ft. lbs.)
3 1 8850-1006 4 HEX NUT, 3/8-16
32 8855-1011 8 LOCKWASHER, 3/8
3 3 9002-7470 4 HARDENED WASHER
*
NOTE #1: When 9108-1384 Pivot Pin breaks, order part number 9108-5077 Steer Cylinder
Pivot Block Kit for the replacement parts needed to accomodate new Pivot Pins.
NOTE #2: All machines must bore out Steering Knuckles to use items 62 & 63. Unless you
have purchased new Steering Knuckles part number 9112-0003 & 9112-0004. See
engineering print that comes with the Steering Knuckle Kit for details.
*
*
*
CHASSIS & ATTACHING PARTS
Rear Steering Axle & Attaching Parts
Starting Serial No. 0144860S
Original Issue 10-90
Revised 6-1-99
PCN 980725, 980730 - JH
* Changed description on Steering Knuckle Kit; changed Part No. on item 41; added
items 62 & 63; added service note #2 and revised illustration.