User's Manual

All written and visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
©2007-2009 Graco Inc. Form No. L10104 Rev. B 1/09 Printed in U.S.A. All other brand names or marks are used for identification purposes and are trademarks of their respective owners. All written and
visual data contained in this document are based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice.
Contact us today!
To receive product information or talk with a Graco representative,
call 800-533-9655 or visit us online at www.graco.com.
WIRING DIAGRAM
NOTE: Diode on DC
version only
Graco endorses the SAE recommendation of ISO 18/14 (ISO 4406) oil cleanliness for most bearing
applications. Some high speed bearing may require cleaner oil. Consult the bearing manufacturer for
recommendation.
COMPONENT ORDERING
Description Part No. Old Part No.
Zero-Leak valve, 120 VAC w/
Brad Harrison 3 pin connector
(1/4-18 NPSF) 563460 527-004-320
(9/16-18 SAE) 563468 527-005-200
Zero-Leak valve, 24 VDC w/Brad
Harrison 3 pin connector
(1/4-18 NPSF) 563464 527-004-870
(9/16-18 SAE) 563467 527-005-180
Zero-Leak valve (no coil), 1/4 BSPP 563462 527-004-770
Repair Kit (w/wrench nut) 563933 560-002-640
COMPONENT ORDERING (continued)
Replacement Coil, 120 VAC 557226 492-120-206
Replacenment Coil, 24 VDC 557225 492-120-205
Remote mount manifold kit (includes outlet
manifold, O-Ring & 2 Mtg screws)
(1/4-18 NPSF) 563461 527-004-360
Inlet Restrictor w/90 Micron Last Chance Filter
(1/4 NPTF) 563074 463-410-204
Brad Harrison Mating Cables
6ft (1.3m) (3 pin) straight 558021 570-999-080
12ft (3.7m) (3 pin) straight 558022 570-999-090
Note: See bulletin L10105 for Modular Zero-Leak
SPECIFICATION
Position Normally closed
Material Anodized Aluminum body
Pressure (max) 1500 psi (104 bar)
Lubricant Oil up to 5000 SUS
Electrical Rating:
(AC) 120V at 60 Hz, 9.5W continuous duty coil,
class "H" insulation, .220 amps holding
(DC) 24V, 28W continuous duty coil w/
diode, class "H" insulation
Filtration (ISO 18/14) or better oil cleanliness level