User's Manual

MSP Modular Divider Valves
Page 6
L10102
Designed with over 100 years of experience in
centralized lubrication.
Engineering certifi ed to ISO 9001 Standards•
Modular design for maximum fl exibility•
Install and maintain without disturbing lube lines•
Quality Design
MSP DIVIDER SPECIFICATIONS
Standard Material Corrosion Protected Steel
Optional Material Type 316 Stainless Steel
O-Ring Seals Standard - 70 Durometer Buna-N
Optional - 70 Durometer Viton
Max Cycle Rate:
w/Cycle Pin 60 CPM
w/out Cycle Pin, or w/Prox
Cycle Sw
200 CPM
Pressure (max) 3500 psi (241 bar)
Temperature (max) Buna-N Seals - 200ºF (93ºC)
Viton Seals - 350ºF (177ºC)
Lubricant Oil or Grease
Zero Leak Inlet:
Pressure (max) 1500 psi (104 bar)
Ambient Temperature (max) 140ºF (60ºC)
Lubricant (oil only) up to 5000 SUS
Requires 25 micron (min) fi ltra-
tion
Electrical Characteristics See page 7
Shunt/Shut-Off Inlet:
Pressure (max) 3000 psi (207 bar)
Intermittent supply pressure only
Ambient Temperature (max) 140ºF (60ºC)
Lubricant Oil and Fluid Grease
Filter oil through 25 micron fi lter
and grease through a 100 mesh
strainer
Electrical Characteristics See page 7
DIVIDER VALVE ASSEMBLY
Description Net Weight lbs (kg)
3 section 5.9 (2.7)
4 section 7.3 (3.3)
5 section 8.7 (4.0)
6 section 10.2 (4.6)
7 section 11.6 (5.6)
8 section 13.0 (5.9)
TORQUE SPECIFICATIONS
TIe Rod Nut 5-8 ft lbs
Valve Block Mtg. Screw 8-9 ft lbs*
Indicator Port Plug 8-9 ft lbs*
Inlet Bleed Screw 1-2 ft lbs
Piston Enclosure Plug 12-15 ft lbs*
*O-Ring sealed components
SIDE VIEW
TOP VIEW
FRONT VIEW
Style Tab(s)
CR Right Right
CL Left Left
CB-Both Right & Left
Singling None
Qty of
Sections
"A"
3 3.578 (90.881)
4 4.500 (114.30)
5 5.422 (137.718)
6 6.344 (161.138)
7 7.266 (184.556)
8 8.188 (207.975)