User's Manual

Trabon
®
Modular MXP Divider Valves
Page 2
L10132
Modular MX Divider Valves are positive displacement, series
progressive types. Each valve piston must complete its stroke,
dispensing a measured amount of lubricant to the bearings it
serves before the inlet fl ow is ported to the next valve piston.
The valves will continue to operate in this manner as long as
fl uid is supplied to the inlet of the divider valve assembly. When
fl ow to the divider valve inlet ceases, the valve pistons will stop
their movement. When fl ow resumes, the valve pistons will
begin moving from the same point at which they stopped.
Because the valves are positive displacement, a blocked line
downstream of a valve piston will prevent piston movement and
create high pressure. When performance indicators are used,
the blocked line may be located by identifying which indicator
pin is extended. Pressure switches and relief type performance
indicators and broken line indicators are also available.
DIMENSIONS
Inches/(mm)
PRODUCT I.D.
NUMBER OF
SECTIONS
A-DIM B-DIM WEIGHT
Inches (mm) Inches (mm) Lbs (Kg)
3 6.66 (169.21) 5.35 (135.89) 18.2 8.3
4 8.01 (203.45) 6.70 (170.13) 22.6 10.2
5 9.36 (237.69) 8.05 (204.37) 26.9 12.2
6 10.71 (271.93) 9.39 (238.61) 31.3 14.2
7 12.05 (306.17) 10.74 (272.85) 35.6 16.2
8 13.40 (340.41) 12.09 (307.09) 39.9 18.1
9 14.75 (374.65) 13.44 (341.33) 44.3 20.1
10 16.10 (408.89) 14.79 (375.57) 48.6 22.1
STYLE TAB(S)
CR RIGHT RIGHT
CL LEFT LEFT
CB-BOTH RIGHT & LEFT
SINGLING NONE