User's Manual

LTL-400Thrif-T Luber Low-Pressure Orifi ce Lubrication System
THRIF-T LUBER ACCESSORIES & HARDWARE (CONT'D)
Figure 22
Figure 23
Figure 23
Tee Fitting–For use with two 4 mm (5/32-in.) tube outlets and
1/8-in. pipe. Measures 28.4 x 25.4 x 15.9 mm (1.12 x 1.00 x 0.62
inches).
Inverted Nut—Brass tube nut to attach 4 mm (5/32-in.) tube to
manifold.
Bearing Fitting—Used in 1/8 NPT bearing tap or manifold to at-
tach 4 mm (5/32-in.) tubing.
Compression Nut–Brass tube nut for bearing fi tting with 5/16-24
thread for 4 mm (5/32-in.) tubing.
Compression Sleeve–For 4 mm (5/32-in.) tubing. Note: Can be
used with inverted nut, or bearing fi tting.
Figure 25
Page 9
22.2mm (
.88)
1/8 NPTF
5/16 UNF-2A
11.1 mm (
.44)
12.7 mm
(.50)
5/16 UNF-2A)
9.5 mm
(.38)
THRIF-T LUBER ACCESSORIES & HARDWARE
Description Part No. Old Part No.
Pressure Gauge, TLPG-00 558296 493-020-199
Tube Clip, TLTC-01 558156 435-710-010
Tube Clip, TLTC-02 558157 435-710-020
Tube Clip, TLTC-03 558158 435-710-030
Tube Clip, TLTC-04 558159 435-710-040
In-Line Filter, TLLF-00 564053 473-000-232
Nylon Tube, TLTP-25 561143 400-132-060
Manifold Bar, TLMB-04 561217 482-000-351
Manifold Bar, TLMB-05 561218 482-000-353
Manifold Bar, TLMB-08 561219 482-000-355
Manifold Bar, TLMB-10 – 482-000-657
Anchor Block, TLAB-00 561216 482-000-348
Tee Fitting, TLTF-00 561215 482-000-347
Inverted Nut, TLIF-00 558190 435-702-268
Bearing Fitting, TLBF-00 558220 464-100-100
Compression Nut, TLCN-00 558189 435-390-070
Compression Sleeve, TLCF-00 558188 435-380-080
Closure Plug, TLCP-00 561155 435-702-267
Figure 26
Closure Plug –Has 7.9 mm (5/16-in.) UNF-2A full thread to within
1.6 mm (0.06-in.) of hex head. Note: Used to plug unwanted
manifold ports.
Figure 27