User's Manual

LTL-400
Thrif-T Luber Low-Pressure Orifi ce Lubrication System
In-Line Filter - Helps keep contaminants that get past the pump's
screen/strainer from clogging orifi ce fi lters. Comes complete with
fi lter body, 25-micron fi lter element, gaskets and closure plug.
Measures 52.4 mm (2.06 in.) long, 25.4 mm (1.00 in.) deep and
31.8 mm (1.25 in.) high.
Pressure Gauge for use with Thrif-T Luber Electric Pump has
plastic case with 50.8 mm (2-in.) diameter dial and 0 to 21 bar (0
to 300 psi) range. Has 1/4-18 NPTF center back mount.
Nylon Tube–Has 4 mm (5/32-in.) O.D., and is burst rated at 69
bar (1000 psi). Comes in 7.62 m (25 ft.) coiled lengths.
Tube Clips–Standard clips for 1, 2, 3, or 4 tubes are plated steel.
Four sizes.
Figure 16 Figure 19
Figure 17 Figure 20
Figure 21
THRIF-T LUBER ACCESSORIES & HARDWARE
Anchor Block–Can also serve as a two-way manifold bar with 4
mm (5/32-in.) tube connection to 1/8 in. female pipe. Measures
28.4 x 15.9 x 25.4 mm (1.19 x 0.62 x 1.00 inches).
Manifold Bars–Have tapped 5/16-in. holes for 4 mm (5/32-in.)
tubing connections. Four sizes.
Page 8
20
40
70
0
10
30
50
600
800
400
200
1000
B
A
3.2 mm
(.12)
22.2mm
(.88)
5 WAY SHOWN
B
A
12.7 mm
(.50)
Figure 18
INLET 1/8 NPSF
OUTLET 1/8 NPSF
34.9mm
(1.37)