User's Manual

LTL-400Thrif-T Luber Low-Pressure Orifi ce Lubrication System
SYSTEM OPERATION
As shown in Figure 1, when the operator actuates the handle,
or when the electric motor receives a signal from the timer, the
pump is activated. The pump dispenses lubricant either into the
mainline tubing which distributes the lubricant to the manifolds,
feeding each Orifi ce Fitting or lines supplying bearing point Orifi ce
Fittings. Each Orifi ce Fitting is sized to dispense the proper amount
of lubricant based on the requirements of the bearing. Details of
the operation of each component are included in this bulletin.
Interchangeability
Trabon components are functionally interchangeable with
other commonly used single-line, resistance (orifi ce) systems.
Mounting dimensions of the components are very close to those
of other systems, and for some components
there is a direct
interchangeability in form and fi t as well as function.
Applications
Trabon Thrif-T Luber Systems are ideal for small to medium
size machine tools and other equipment requiring economical,
intermittent, oil lubrication.
BEARING
ELECTRIC MOTOR
DRIVEN PUMP
BEARING
TUBING
BEARING POINT
(TYPE A)
ORIFICE METER
MANIFOLD
MANIFOLD MOUNT
(TYPE B)
ORIFICE FITTINGS
Figure 1: Thrif-T Luber System Diagram
ANCHOR FITTINGS
FITTINGS AND ADAPTERS
FILTER
HAND-OPERATED PUMP
Page 2