User's Manual

247827 Heater control module
247828 A, B, hose heater power module
247838 Modular heater control to retrofit electric/hydraulic units
255149 Circulation valve – ISO only
255150 Circulation valve – resin only
255148 Circulation valve kit – includes ISO and resin
circulation valves, Fusion
®
grease and grease gun
24A024 Conversion kit, local control module
for Reactor H-40 and H-25
Includes local control module, linear transducer, electrical control
box, brackets, data cable, power cable, gun cable
and miscellaneous hardware
15T859 Data cable, 10 ft (3 m)
Connects local control module to the Reactor IP’s
electrical control box
15T961 Data cable extension, 25 ft (7.5 m)
Can be combined with 15T859. Connects local control module
to the Reactor IP’s electrical control box
121002 Power cable, 5 ft (1.5 m)
Connects local control module to the Reactor IP’s
electrical control box
15T960 Power cable, 35 ft (10 m)
Connects local control module to the Reactor IP’s
electrical control box
24D679 Gun cable, 10 ft (3 m)
Connects the gun to the Reactor IP’s electrical control box
24E898 Gun cable extension, 25 ft (7.5 m)
Can be combined with 24D679. Connects the gun
to the Reactor IP’s electrical control box
24E897 Gun cable extension, 50 ft (15 m)
Can be combined with 24D679. Connects the gun
to the Reactor IP’s electrical control box
255817 Local control module
Pumps
Reactor IPH-40 has #140 as standard pumps. Reactor IPH-25 has #120
as standard pumps. Order a different pump size for different flow rates
or different ratios. Pumps must be purchased and installed separately.
247371 Proportioner pump kit, size 30
247372 Proportioner pump kit, size 40
247373 Proportioner pump kit, size 48
247374 Proportioner pump kit, size 60
247375 Proportioner pump kit, size 80
247577 Proportioner pump kit, size 88
247376 Proportioner pump kit, size 96
247377 Proportioner pump kit, size 120
247576 Proportioner pump kit, size 140
Hoses, 2000 psi (138 bar, 13.8 MPa)
246051 3/8 in x 10 ft (9.5 mm x 3 m)
246049 3/8 in x 25 ft (9.5 mm x 7.6 m), with scuffguard
™
246046 3/8 in x 50 ft (9.5 mm x 15 m), with scuffguard
246075 3/8 in x 50 ft (9.5 mm x 15 m), no thermocouple wire
246678 3/8 in x 50 ft (9.5 mm x 15 m), with scuffguard
246047 1/2 in x 50 ft (12.7 mm x 15 m)
246076 1/2 in x 50 ft (12.7 mm x 15 m), no thermocouple wire
Hose Accessories
246077 10 ft (3 m) braided polyester mesh scuffguard
246078 50 ft (15 m) braided polyester mesh scuffguard
246456 50 ft (15 m) polyethylene scuffguard
246805 25 ft (7.6 m) braided polyester mesh scuffguard
248921 Heated hose controller, 2700 watt. Allows Reactor
heated hose extended past 300 ft (91 m). Requires
200-230 volts at 15 amps
15B296 FTS cable 50 ft (15 m)
261821 Heated hose jumper
(required when not using heated whip)
15C626 Fluid temperature sensor (FTS) cable 25 ft (7.6 m)
261669 Fluid temperature sensor
15F028 Band heater, 1000 watt, for 55 gal (208 l) drum, 230 volt
261821 Power-lock
™
splice kit
15M312 Power-lock splice kit (20-pk)
(enough for 10 hoses)
246050 1/4 in x 10 ft (6.3 mm x 3 m)
Ordering Information
To get genuine Graco accessories, see your nearest Graco Distributor, or call Graco at 1-877-844-7226
Reactor IP Accessories
6
Heated Whip Hoses
3
Heated Hoses
2
30
30
1.000 1.333 1.6002.000 2.6672.933 3.200 4.000 4.667
40 0.750 1.000 1.200 1.5002.000 2.200 2.400 3.000 3.500
48 0.625
60 0.500
80 0.375
88 0.341
96 0.313
120 0.250
140 0.214
0.833
0.667
0.500
0.455
0.417
0.333
0.286
1.000
0.800
0.600
0.545
0.500
0.400
0.343
1.250
1.000
0.750
0.682
0.625
0.500
0.429
1.667
1.333
1.000
0.909
0.833
0.667
0.571
1.833
1.467
1.100
1.000
0.917
0.733
0.629
2.000
1.600
1.200
1.091
1.000
0.800
0.686
2.500
2.000
1.500
1.364
1.250
1.000
0.857
2.917
2.333
1.750
1.591
1.458
1.167
1.000
40 48 60 80 88 96 120140
Ratio Possibilities
Ratios are approximate.