User's Manual

Select a Reactor IP

Choose from the Reactor IPH-40,

or the Reactor IPH-25 (both hydraulic motors).

KEY FEATURES:

• Quick knock down fluid sections

• Optional data reporting capabilities

• Foam models rated at 2000 psi (138 bar, 13.8 MPa)

• Optional pump sizes available for different ratios

Select heated hose

Pressure rating of 2000 psi (138 bar, 13.8 MPa).

Choose 1/4 in (6.4 mm), 1/2 in (12.7 mm)

or 3/8 in (9.5 mm) IDS.

Select heated whip hose

Pressure rating of 2000 psi (138 bar, 13.8 MPa).

Choose 1/4 in (6.4 mm), 1/2 in (12.7 mm)

or 3/8 in (9.5 mm) IDS.

Select a pour gun

EP Pour Gun:

• Flow rates of 1 to 50 lb/min

(0.45 to 22.7 kg/min)

Select supply processing equipment

SUPPLY PUMP

Choose from diaphragm or piston pumps for standard

materials in drum-mount or wall-mount. Select a 2:1

piston pump for materials with higher viscosities.

AGITATOR KITS

Choose a kit to agitate your resin for a consistent coating.

Graco’s patented Twistork

agitators are very low shear

to minimize material frothing.

SUPPLY PUMP

REACTOR

POUR GUN

HEATED HOSE

HEATED WHIP

HOSE

Reactor System Components

How to select system components for your Reactor IP

Use this selection tool in conjunction with the part numbers listed on pages 5-7.

AGITATOR KITS