PR70 ™ Meter, Mix and Dispense Systems Ordering Information
PR70 System Comparisons PR70e with LCM System Configured system? Ratios Fixed Ratio Variable Ratio Shots No PR70 with DM Yes PR70 with ADM Yes PR70v with ADM Yes 1:1 to 12:1 NA 1:1 to 12:1 NA 1:1 to 12:1 NA NA 1:1 to 24:1 Number of shots Shots Based on Percentage of stroke Weight Based Shots Multi-stroke shots (over 100%) Shot Sequencing 1 Yes No No No 5 No Yes Yes Optional 50 No Yes Yes Yes M
How to order your PR70e STEP 1: Select your PR70e system for air motor size & valve The four PR70e system part numbers shown below include the fixed ratio PR70e frame, feed system inlet manifold, one MD2 valve, ADM with 6 foot (2 m) umbilical and basic metering pump components. Note that these system part numbers do not include any metering pumps, outlet hoses, feed reservoirs, air inlet moisture trap, foot switch, mixers, shroud etc. System MD2 Valve Air Motor Required Volume Ratio in.
STEP 3: Select your Piston Package based on your requirements The metering pump components are called the “Piston Package.” Each piston package consists of a metering tube, piston, washer screw, O-Rings (as shown in the column headings below). For example, if you have a 4:1 volume mix ratio, and want a 960mm / 240mm nylon pump combination, you could order the LC1960 and LC1240 Piston Package as shown in the chart below.
STEP 3: Continued UHMW Piston, Stainless Steel Metering Tube Assemblies Reference Number and Description Piston Size (mm) Piston Package 601 Tube, Pump 602 UHMW Piston Washer 604 Ring, Support,Piston 605 Screw 606 O-Ring 160 LC2160 LCC160 LCA160 180 LC2180 LCC180 LCA180 200 LC2200 LCC200 LCA200 220 LC2220 LCC220 LCA220 240 LC2240 LCC240 LCA240 260 LC2260 LCC260 LCA260 280 LC2280 LCC280 LCA280
STEP 5: Select your hoses by length and diameter required Individual hoses are called the “Hose Package.” Each hose package consists of the hose with the fittings required to connect the hose to the PR70 and the MD2 valve.
PR70 Configurator Building the Perfect PR70 is Easy! Customize the PR70 with the features you need. Contact your local Graco Distributor to see all the available configured options. PR70 A B-C D-E F G-H I-J K L M N 0 P Q R S T U V Motor Selection • 3.0 in. (76.2mm) • 4.5 in. (114.
Accessories Reservoir Atmosphere Conditioning Service Kits for PR70/PR70v LC0097 LC0098 LC0095* LC0096* 255220 15V551 15M483 Desiccant Dryer, 3/8 in NPT with adapter and cartridge Desiccant Dryer Refill Cartridge Nitrogen Kit for 30L and 60L tank, 1 tank Nitrogen Kit for 30L and 60L tank, 2 tanks Reservoir Vacuum Conditioning for PR70/PR70v LC0099 LC0100 256205 256206 256207 256209 256577 Vacuum Transfer Pumps, 120V, Down to 25 Torr (Requires Vacuum Transfer Connect Kit)
ABOUT GRACO Founded in 1926, Graco is a world leader in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings. The company’s success is based on its unwavering commitment to technical excellence, world-class manufacturing and unparalleled customer service.
