User's Manual

Single-Component Sprayers
Supply Processing Equipment
Hoses and Guns
Accessories
Plural-Component Sprayers
7
Ordering Information
262878 Base XM PFP. No feed modules or heated hose bundle. Base XM PFP includes: XM60, Viscon
®
HF primary heaters, Viscon HP with hose heat supply
system, 30:1 Merkur
®
ush pump, PFP mix manifold, mixer, whip hoses and gun.
262869 Complete XM PFP System. Includes base XM PFP with 50 ft (15 m) dual heated hose, mix manifold, 17 ft (5 m) static mix line, 30:1 ush pump,
XHF Gun with 429 tip. Includes two Check-Mate
®
20-gal (76 l) heated feed modules with agitators and level sensors.
16T481 Check valve, ¾ in (19 mm) npt (fbe), 7250 psi (500 bar/50 MPa)
16T859 Hot water ush kit, 180°F (82°C) with auto ll and temperature control
255478 Dosing valve, A or B replacement valve
262872 XM PFP sampling valve. Used for weight ratio checks.
24P268 Ball valve, 3/4 in (19 mm) npt, 6000 psi (414 bar/41.4 MPa)
L220C9 XM PFP lower replacement, 220 cc, X-Tuff
™
(repair kit 262793)
L180C9 XM PFP lower replacement, 180 cc, X-Tuff (repair kit 262792)
L180C7 Xtreme PFP lower replacement, 180 cc, Xtreme Seal (repair kit 24F969) (has inlet ball spacers in a different location)
Includes 75 ft (23 m) spray line and XHF Gun with 429 tip.
16P957 Xtreme PFP, oor mount
16T311 Xtreme PFP, cart mount
24P883 Heated Supply Module. Includes 40:1 Check-Mate, heated pressure tank, agitator, level sensor, and bottom outlet feed hose and connection.
24P884 Level sensor kit. Replacement for XM PFP heated tanks.
24P831 Level sensor probe replacement
16T525 Viscon LT heater for tank heat circulation, 1750 W
24P885 XM PFP feed module agitator
24P835 Husky
™
205 hot water circulation pump for tanks or heated hose
262896 Tank dryer kit. Provides additional ltration and moisture control for heated tanks.
24P899 XM PFP main line air lter kit (1-1/4 in npt)
262853 Viscon HF heater kit, remote controlled.
Not approved for use in explosive atmospheres.
16T122 Heated hose bundle. Includes 50 ft, ¾ in x ¾ in (15 m, 18 mm x 18 mm), 6500 psi (448 bar/44.8 MPa) uid hoses; ¼ in (6 mm)
4500 psi (310 bar/31.0 MPa) ush hose; and four ½ in (13 mm) heat tubes. Includes scuff guard.
16T121 Heated hose bundle. Includes 50 ft, ¾ in x ½ in (15 m, 18 mm x 13 mm), 6500 psi (448 bar/44.8 MPa) uid hoses; ¼ in (6 mm)
4500 psi (310 bar/31.0 MPa) ush hose; and four ½ in (13 mm) heat tubes. Includes scuff guard.
16T316 Static mixer assembly, 12 element, SST
24P886 Mix element replacement, SST
262890 XM PFP mix manifold with ball valves and check valves, 6000 psi (414 bar/41.4 MPa)
237260 XHF Gun repair kit
24P832 Xtreme PFP Gun and mix line kit, 75 ft (23 m) - (single component pump to gun)
24P833 XM PFP Gun and mix line kit, 17 ft (5 m); includes static mixer - (mix manifold outlet to gun)
16T484 Hose, ¾ in (19 mm) ID x 50 ft (15 m), ¾ in (19 mm) npsm (fbe), 6500 psi (448 bar/44.8 MPa) nylon core
H75050 Hose, ½ in (13 mm) ID x 50 ft (15 m), ½ in (13 mm) npsm (fbe), 7250 psi (500 bar/50 MPa) nylon core
H75025 Hose, ½ in (13 mm) ID x 25 ft (7.6 m), ½ in (13 mm) npsm (fbe), 7250 psi (500 bar/50 MPa) nylon core
262854 XHF Gun, includes XHD 429 tip
24P834 XHF Gun swivel, 1/2 in f x 3/8 npsm, PTFE packing, 6500 psi (448 bar/44.8 MPa)