User's Manual

6
Technical Specifications
MODEL XM PFP XTREME PFP
Mix Ratio Range 1:1 - 10:1 (In 0.01 increments) Hot Potted
Ratio Tolerance Range (before alarm) +/- 5% No Alarm
Max Flow Rate 3 gpm (11.4 lpm) 2.93 gpm (11.1 lpm)
Fluid to Air Pressure Ratio 60:1 70:1
Fluid Viscosity Range Handles mastic materials which are loaded into
heated tanks with ram-fed priming piston pumps
Handles mastic materials of two parts
(A and B) which are mixed then ram-fed
Air Inlet 1 in npt(f) 3/4 in npt(f)
Fluid Inlets Ram plate fed pail pumps Ram plate fed pail pump
Max Fluid Working Pressure of mixed material 6000 psi (414 bar, 41.4 MPa) 6500 psi (448 bar, 44.8 MPa)
Max Fluid Temp 160°F (70°C) Hot potted (depends on material)
Incoming Air Supply Pressure Range 80-150 psi (5.5-10.3 bar, 0.5-1.0 MPa) 80-150 psi (5.5-10.3 bar, 0.5-1.0 MPa)
Max Pump Air Set Pressure 100 psi (7 bar, 0.7 MPa) 90 psi (6.2 bar, 0.6 MPa)
Max Tank Pressure 100 psi (7 bar, 0.7 MPa) NA
Max Air Consumption 175 scfm (5 meter
3
/min) 115 scfm (3.25 meter
3
/min)
Air Filtration 40 micron main lter, 5 micron control lter 40 micron lter
Ambient Operating Temp Range 32° - 130°F (0° - 54°C) 50° - 130°F (10° - 54°C)
Ambient Storage Temp Range 30° - 160°F (-1° - 71°C) 34° - 86°F (1° - 30°C)
Environmental Conditions Rating Altitude up to 13,123 ft (4000 m) Altitude up to 13,123 ft (4000 m)
Sound Pressure 86 dBA at 100 psi 87 dBA at 100 psi, 15 cycles/min
Sound Power 98 dBA at 100 psi 98 dBA at 100 psi, 15 cycles/min
Weight 2175 lb (987 kg) 392 lb (178 kg), includes cart
POWER REQUIREMENTS
Voltage (Jumper selectable) Option 1: 220-240V, 3-ph (3 wire plus ground) NA
Option 2: 380-400 DELTA, WYE, 3-ph
(4 wire including neutral plus ground)
NA
Wattage 18,400 Watts
(23,400 Watts with optional ush water heater)
NA
Amps 65 amps DELTA
(38 amps WYE)
NA
WETTED PARTS
Suction Tube (flush) Aluminum NA
Tanks Stainless Steel NA
Flush Pump Carbide, PTFE, stainless steel, UHMWPE NA
Hoses Nylon Nylon
Pumps (A, B and feed pail) Carbon steel, alloy steel, 303, 440, 17-ph grades
stainless steel, zinc and nickel plating, ductile
iron, tungsten carbide, PTFE
Carbon steel, alloy steel, 304, 440, 17-ph grades
stainless steel, zinc and nickel plating, ductile
iron, tungsten carbide, PTFE, leather
Metering Valves Carbon steel, nickel plating, carbide,
polyethylene, leather
NA
Manifold Carbon steel, nickel plating, carbide,
302 stainless steel, PTFE, UHMWPE
NA
Mixer Stainless steel housing with stainless elements NA
APPROVALS
Machine CE, ETL to UL 499 and CSA 22.2 CE
Pressure Tanks ASME, PED
Manuals 3A2776 3A2798