User's Manual

Mark X 240 VOLT
Electric Airless Texture Sprayer
©2008-2013 Graco Inc. 343126B
About 240 Volts
• The Mark X 240 VOLT operates on 220-240
volt, single phase power (L6-30 plug).
• 220-240 volt power is available at
most construction sites or with a
typical generator.
• Demand for 240 volts on a jobsite is less,
so it is easier to find an open receptacle.
No fighting other trades for power.
• 240 volts gives the extra power needed to
achieve gas sprayer performance, in an
electric unit.
• Contractors have discovered that 240 Volts
is an advantage, not an obstacle!
• 220-240 volt power is usually provided one
of two ways:
– 4 wire
– 3 wire
• Mark X is built with a 3-wire plug to be
connected to a 3 wire receptacle
• Mark X can be connected to 4 wire
receptacle by using an adapter pigtail
assembled by an electrician as follows:
Y - Red Hot
X - Black Hot
G - Green Ground
W - White Neutral (not used)
G
Y
W
X
L1 Hot
L2 Hot
Neutral
Ground
3-Pole, 4-Wire Grounding: 240V
Black
White
Red
Green/Bare
EQUIP.
GROUND
L14-30R
G
120V
120V
240V
Look for markings on device:
• X and Y are Hot
• G is Ground
• W is Neutral
G
Y
X
L1 Hot
L2 Hot
Ground
2-Pole, 3-Wire Grounding: 240V
Black
Red
Green/Bare
EQUIP.
GROUND
G
Look for markings on device:
• X and Y are Hot
• G is Ground
L6-30R
240V