User's Manual

Trabon

Injecto-Flo

Page 2

L12121

PISTON DISTRIBUTOR FOR OIL

AND FLUID GREASE

FUNCTION

1. The amount of lubricant intended for the lube point is stored in

front of the piston in the distributor.

2. When the central lubrication pump begins to deliver lubricant,

the piston moves and the lubricant in front of it is fed to the

lube point at a main line pressure of 10-45 bars.

3. When pump delivery stops and main line pressure is relieved,

the distributor’s piston returns to its initial position and

transfers a measured quantity of lubricant into the space in

front of it.

FUNCTION

Piston distributors meter out and distribute the lubricant delivered

by an intermittently actuated pump.

The quantities of lubricant for the individual lube points are

determined by exchangeable metering nipples. The metered

amount is indicated on the individual nipples. The amount needed

to cover the total oil demand can then be further regulated via the

lubricating frequency.

To meet the required quantities and comply with space constraints

it is possible to choose among four

distributor groups that differ in terms of their metering ranges and

sizes.

The functional principle of the groups is the same, but there are

differences in design. Different distributor groups can be used in

one installation.

Distributor for Oil group Quantity cm³

3400 0.01 0.03 0.06 0.1 0.16

3500 0.1 0.2 0.4 0.6

3900 0.2 0.4 0.6 1.0 1.5

Distributor for

ﬂ uid grease group

Quantity cm³

3410 0.01 0.03 0.06 0.1

3510 0.1 0.2 0.3

3910 0.1 0.2 0.3