Safety Instructions
Table Of Contents
- Contents
- Models
- Warnings
- Component Identification
- Grounding
- Pressure Relief Procedure
- Setup
- Operation
- Display
- Manifold Assembly Parts
- Motor Assembly Parts
- Control Box Parts - 120V
- Control Box Parts - 230V
- Technical Specifications
- Compliance
- Graco Standard Warranty
- Graco Information
- Maintenance
- Troubleshooting
- Repair
- Pendant Battery Replacement
- Hydraulic Schematic
- Wiring Diagram - 120V
- Wiring Diagram - 230V
- Renegade TSP Torque Series Pump Parts
Technical Specifications
52 3A6884B
Technical Specifications
Hydraulic Power Pack
US Metric
Pressure
10,000 psi 700 bar, 68.9 MPa
Maximum delivery
1.7 gpm 6.4 lpm
Fluid outlet npt
1/4 in. 1/4 in.
Generator minimum
4000 W 4000 W
Motor (brushless DC)
2 HP 1500 W
120V, A, Hz
20A, 50/60 20A, 50/60
230V, A, Hz
10A, 50/60 10A, 60/60
Environmental temperature range -40°–120°F -40°– 49°C
Oil reserve capacity 1 gallon 3.8 liter
Recommended hydraulic oil
Grade ISO 10-68
Operating oil viscosity range
(centistokes)
See chart below
Dimensions
Weight (dry) 85 lb 39 kg
Height 17 in. 43 cm
Length 17.75 in. 25 cm
Width 14 in. 36 cm
Ingress Protection
Power pack assembly 44
Pendants 56
Noise (dBa)*
Maximum sound power
94.0 dBa @ 70 psi (0.48 MPa, 4.8 bar)
Maximum sound pressure
80.0 dBa @ 70 psi (0.48 MPa, 4.8 bar)
Notes:
*Sound pressure measured 3.1 feet (1 meter) from equipment.
Sound power measured per ISO-3744.
Recommended Oil Temperature Ranges for Various Hydraulic Oil Weights