Safety Instructions
Table Of Contents
- Contents
- Models
- Warnings
- Component Identification
- Grounding
- Pressure Relief Procedure
- Setup
- Operation
- Display
- Manifold Assembly Parts
- Motor Assembly Parts
- Control Box Parts - 120V
- Control Box Parts - 230V
- Technical Specifications
- Compliance
- Graco Standard Warranty
- Graco Information
- Maintenance
- Troubleshooting
- Repair
- Pendant Battery Replacement
- Hydraulic Schematic
- Wiring Diagram - 120V
- Wiring Diagram - 230V
- Renegade TSP Torque Series Pump Parts
Setup
3A6884B 11
Setup
Pendant Setup
Corded Pendant
Attach Corded Pendant by lining up the tab
on the plug with the socket located on the
power pack control. Insert the plug and turn
clockwise until you hear the lock click. The
Corded Pendant must be selected to be the
active control, see Select Control Device
page 17.
Wireless Pendant
The Wireless Pendant must be selected to be
the active control. See Select Control
Device page 17.
Fill Oil Tank
Unit is shipped without hydraulic oil. Before
the first use, fill tank with hydraulic oil, see
Recommended Oil Temperature Ranges
for Various Hydraulic Oil Weights
page 52.
1. Remove Oil Fill Cap.
2. Add hydraulic oil until oil is visible at the
top of the Sight Glass.
3. Replace Oil Fill Cap.
FULL