Safety Instructions
Table Of Contents
- Contents
- Models
- Warnings
- Component Identification
- Grounding
- Pressure Relief Procedure
- Setup
- Operation
- Display
- Manifold Assembly Parts
- Motor Assembly Parts
- Control Box Parts - 120V
- Control Box Parts - 230V
- Technical Specifications
- Compliance
- Graco Standard Warranty
- Graco Information
- Maintenance
- Troubleshooting
- Repair
- Pendant Battery Replacement
- Hydraulic Schematic
- Wiring Diagram - 120V
- Wiring Diagram - 230V
- Renegade TSP Torque Series Pump Parts
Pressure Relief Procedure
10 3A6884B
Pressure Relief Procedure
Follow the Pressure Relief
Procedure whenever you see this
symbol.
NOTE: The TSP power pack is designed to
automatically relieve pressure when the
pump motor stops.
1. Verify displayed pressure goes to zero
when motor stops.
2. If pressure is not zero, then press
Pressure Relief Button.
3. Verify pressure has dropped to zero.
4. If you suspect that pressure has not
been fully relieved, rotate the Pressure
Setting Valve counterclockwise until
rotation stops.
To help prevent serious injury from
pressurized fluid, such as skin injection,
splashing fluid and moving parts, follow the
Pressure Relief Procedure before
cleaning, checking, or servicing the
equipment.