User's Manual

GENUINE GRACO PARTS AND ACCESSORIES

563933 MSP Bubble Tight

Inlet Shut-Off Valve Repair Kit

Important Safety Instructions

Read all warnings and instructions in manual. Save

these instructions.

406684B

Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441

406684 Rev, B 06/2009

Ref. Description Qty.

1 KIT, solenoid 1

2 SEAT, nylon 1

3 NUT, wrench (not shown) 1

4 SCREW, 1 1/4-6 flat head (not

shown)

Nylon seat (2) face down

ti10990a

Included in Kit 1

PAGE 1
GENUINE GRACO PARTS AND ACCESSORIES 563933 MSP Bubble Tight Inlet Shut-Off Valve Repair Kit Important Safety Instructions Read all warnings and instructions in manual. Save these instructions. 406684B Included in Kit 1 Ref. Description Qty. 1 KIT, solenoid 1 2 SEAT, nylon 1 3 NUT, wrench (not shown) 1 4 SCREW, 1 1/4-6 flat head (not shown) 1 2 Nylon seat (2) face down ti10990a Graco Inc. P.O. Box 1441 Minneapolis, MN 55440-1441 406684 Rev, B 06/2009 Copyright 2007, Graco Inc.
PAGE 2
Repair Instructions Disassembly Reassembly 1. Remove the 1/2-20 acorn nut at the top of the solenoid coil and pull the coil off. 1. Place a new nylon seat (2) with its chamfered hole downward over the nylon seat-well with its axis as vertical as possible. 2. Slip the spanner nut (3, not shown) over rod. Insert into the two holes in the retaining disc. Loosen with a wrench. 3.