User's Manual

Component Identification
8 3A2824B
Mounting Heater
Heater controls must be easily accessible.
The mounting surface must be able to support the
weight of the heater and fluid, and any stress caused
during operation.
Wall Mounting
Use included wall bracket 16R988 and insulating
washers (29), part number 167002, quantity 2. See FIG.
4.
Use wall bracket as a template to mark bolt holes.
Bracket 16R988
(FIG.4)
1. Use 1/4 in. bolts of appropriate length and
lock-washer (CC), not supplied, to mount bracket.
2. Use two screws (32) and washers (31) to install
heater onto bracket.
FIG.4:
ti20000a
29
32
31
CC