User's Manual

Startup

3A2797G 43

Startup

1. Check that all machine connections are setup. See

Setup procedure, page 28.

2. Check level and condition of ISO lube daily, see

IsoGuard Select

™

System on page 48.

3. Verify both PRESSURE RELIEF/DISPENSE valves

(SA, SB) are set to DISPENSE .

4. If dispense valve has a trigger safety lock, engage

the trigger safety lock.

5. Open system fluid inlet valves and ball valves found

on the material tanks. As applicable, ball valves on

the material tanks include material supply, applica-

tor return, and pressure relief. Check for leaks.

6. Press to enable system. LED should be solid

green.

7. Navigate to Home Standby screen and press

to initiate auto startup.

8. Check that heat zones are on and temperatures are

on target. Check fluid pressure display. Refer to Sta-

tus Screen on page 72 for more details.

9. If dispense valve has a trigger safety lock, disen-

gage the trigger safety lock.

i. Equipment is ready to dispense.

To reduce the risk of personal injury, do not operate

HFR without all covers and shrouds in place.

ti9877a1

ti10442a1

LOCKED

ti10441a1

UNLOCKED