User's Manual

Setup

28 3A2797G

Setup

Perform this setup procedure to secure all necessary

machine connections for machine operation.

Locate system.

a. Locate system on a level surface. See Dimen-

sions on page 97 for space requirements.

b. Do not expose system to rain.

Electrical requirements. See Models on page 4

for detailed electrical requirements information.

Ground system

a. System: grounded through power cord. See

step 4 on page 28.

b. Fluid supply containers: follow your local code.

c. Object being dispensed into: follow your local

code.

d. Solvent pails used when flushing: follow your

local code. Use only metal pails, which are con-

ductive, placed on a grounded surface. Do not

place pail on a nonconductive surface, such as

paper or cardboard, which interrupts grounding

continuity.

e. To maintain grounding continuity when flushing

or relieving pressure, hold a metal part of dis-

pense gun firmly to the side of a grounded

metal pail, then trigger gun.

Connect electrical cord to system.

NOTE: See Power Line Voltage Surges information on

page 29.

NOTE: Power cord is not supplied. See the following

table.

Installing this equipment requires access to parts

which may cause electric shock or other serious injury

if work is not performed properly. Have a qualified

electrician connect power and ground to main power

switch terminals, see step 4 in this setup procedure.

All electrical wiring must be done by a qualified electri-

cian and comply with all local codes and regulations.

This equipment must be grounded.