User's Manual

Appendix A - User Interface Display
3A2776D 71
Information Screens
Use this screen to view alarm diagnostic information,
alarm logs, and pump batch and grand totals. These
screens also enable users to view maintenance informa-
tion for pump and check valves, including the mainte-
nance schedule.
NOTE:
If the potlife timer is enabled, the Flush Confirm
icon displays.
Alarm
The Alarm screen displays the specific alarm code.
There are two levels of error codes: alarms and adviso-
ries. A solid bell icon with an exclamation point and
three audible alerts indicate a alarm. And an outlined
hollow bell icon and a single audible alert indicate an
advisory.
Additionally, this screen displays the location of the error
with the top view and side view of the system. Refer to
the following table and subsections for more details.
Alarm Log
Use this screen view details regarding alarms received,
including the date, time, and alarm code for the last 16
alarms. Up to four pages of alarms are available.
Press to access the alarm log. The press and
to scroll through each page of alarms.
Icon Function
Go to Alarm log. Use up and down arrows
to scroll through list of the past 16 errors.
Go to totalizer screen. Allows users to view
the grand and batch totals for each pump
and both pumps combined.
Icon Function
Go to maintenance screen. Allows user to
view maintenance information.See Mainte-
nance Setup 2, page 64.
Flush confirm. Use when the potlife timer is
enabled. Press button to confirm flush
before a potlife advisory is issued.
Amount of material moved through pump
that will result in a maintenance warning.
Amount of material moved through dosing
valve that will result in a maintenance
warning.
Number of days between maintenance
cycles that will result in a reminder advi-
sory.
Clear batch totalizers or maintenance
counters.