User's Manual

Appendix A - User Interface Display
68 3A2776D
Park Mode
Users must be in this mode to park the metering pump
fluid rods to the bottom of their stroke. Press the button
below the park icon to enter this mode.
Ratio Mode
This screen displays the current ratio or the adjust
restriction screen. To access this screen, press .
NOTE: If the field is enabled on the Enable
Setup screen, the Spray Mode screen will be replaced
by the bar graph screen after 10 seconds of spray time.
Press to return to the Spray Mode screen.
Adjust Restriction Screen
This screen shows the balance of the A and B fluid
sides. If the bar graph remains all the way to the right,
there is not enough restriction on the B side and adding
more restriction will lower the dosing size. If the bar
graph remains all the way to the left, there is too much
restriction on the B side. Reducing restriction will reduce
dosing size.
Icon Function
Display Ratio: show the accuracy of the
fluid mix ratio.
Display Adjust Restriction Screen