User's Manual

Setup

20 3A2776D

Connect the Fluid Hose Bundle

to the System

The system is shipped with a 50 ft (15 m) hose bundle

for connecting the system to the mix manifold.

The bundle contains one 3/4 in. ID A material hose, one

1/2 in. ID B material hose (model 262869) one 3/4 in. ID

B material hose (model 24W626), one 1/4 in. ID flush

hose, and 1/2 in. OD heated fluid circulation tubes. The

hose bundle is insulated and wrapped inside a protec-

tive sheath which has a Velcro closure so it can be

opened to change hoses.

1. Position the hose bundle end with the four loose red

and blue tubes at the machine outlet.

Model 262869: Connect the 3/4 in. A and 1/2 in. B

hoses to the respective material outlet check valves

on the front of the system. See F

. 16.

Model 24W626: Connect the 3/4 in. A and 3/4 in. B

hoses to the respective material outlet check valves

on the front of the system. See F

. 16.

2. Connect the short purple flush hose from the solvent

flush pump to the 1/4 npsm hose in the bundle. Use

the 1/4 in. nipple included with the hose bundle to

connect the hoses. See F

. 17.

3. Connect the two red tubes in the bundle to the tube

tee on the red tube on the front of the machine. Do

the same for the blue tubes. See F

. 18.

. 16

ti20106a

. 17: Solvent Flush Pump Connection

. 18

ti20272a

ti20273a