User's Manual

Setup

3A2776D 17

Connect Air Supply

Connect air supply line to the 1 in. npt(f) air supply ball

valve inlet.

NOTE:

Use a 3/4 in. (19.1 mm) ID minimum air hose.

NOTE:

Air supply requirement:

150 psi (1.0 MPa, 10.3 bar)

maximum; 80 psi (552 kPa, 5.5 bar) minimum (while

running).

Flow volume required:

100 scfm (2.8 m

/min) minimum;

250 scfm (7.1 m

/min) maximum. Available fluid pres-

sure and flow rate are directly related to available air

volume. A typical single gun XM PFP application will use

125 to 175 scfm (3.5 to 5.0 m

/min).

NOTE:

Dosing valves are operated by air. The sprayer will not

operate correctly if the inlet air pressure drops below

80 psi (552 kPa, 5.5 bar) while spraying.

ti20105a