User's Manual

Setup
14 3A2776D
Setup
Location
Select a non-hazardous location with the required power
and air supply to set up your sprayer. Maintain access
from all sides.
Unboxing
The machine is shipped on two separate pallets, one
with the XM PFP and one with the two feed modules.
Each pallet is wrapped in heavy cardboard with a lid
secured with straps. Cut the lid straps then remove the
lids and cardboard.
Configuration Options
The system can be laid out two ways:
• Side by side: where the feed modules are on either
side of the system module
• Front to back: where the feed modules are behind
the system module
F
IG . 9
Front to Back Configuration
Side by Side Configuration
ti20267a
ti20268a