User's Manual

Display Mo dule
Screen Icons
Screen number.
The arrows indicate
more screens are
available to view.
Lock icon indicates
the unit is in Setup.
Batch Totalizer Batch Units
Maintenance Totalizer
Maintenance Target
Grand Totalizer Set Grand Total Units
Fluid Flow Percent
Target
Fluid Pressure
Fluid Flow Rate
Set Mod
bus Mode
Set Modbus Address Set Serial Port Baudrate
SetSerialPortParity
Modbus Functionality is
Off
Set Upper and Lower
Limits for Fluid Flow
Percent
ProControl 1KE is
Modbus Slave
Screen Icons
Set Pressure Units
Set Maximum and
Minimum Flow Rates
Set Flow Rate Units
Maintenance Totalizer
Alarm Enable
Flow Rate Alarm
Enable
Set Alarm Auto Clear
(to clear alarm on ac-
cessories)
Set Backlight Timer
Volume measured
by the meter
Actual vo
lume
dispense
d
K-Factor
Select Pressure
Transducer
Set Zero Offset
Display or adjust pres-
sure transducer slope
F3
Flow Rate High Alarm
MF
Maintenance Alarm
F2
Flow Rate Low Alarm
Select Correct Date Select Date Format
Set the Correct Time
Enter User-Set
Password
3A2614F 23