User's Manual

Front Wheel Replacement

34 3A2593B Repair

Front Wheel Replacement

Removal

1. Apply parking brake. Raise front wheel off ground

and support frame on two jack stands.

2. Remove locknut (39) from axle bolt (37) and remove

axle bolt (37) from fork (34).

3. Remove two spacers (36) and wheel (35) from fork

(34).

Installation

1. Insert two spacers (36) into wheel (35) and slide into

fork (34).

2. Insert axle bolt (37) through fork (34), spacers (36)

and wheel (35).

3. Tighten locknut (39) onto axle bolt (37).

NOTE: When properly tightened, the wheel should

not wobble to the left or right and should stop

coasting quickly.

4. Verify front tire pressure is 55-80 psi (380-550 kPa).

5. Remove jack stands and test drive sprayer to verify

straight line tracking. Adjust if necessary (see Oper-

ation manual).

ti19693a

ti20125a