User's Manual

Forward/Reverse Cable Replacement

30 3A2593B Repair

Forward/Reverse Cable

Replacement

Removal

1. Remove tank lid and siphon tube.

2. Remove tank from unit.

3. Use wrench to remove six screws from front shield.

4. Remove front shield from unit.

5. Loosen four screws and remove belt cover.

6. At the handlebar, remove locknut (3) and ball joint

(40) from handlebar forward/reverse lever. Remove

ball joint (40) from cable (148) and save if not

replacing. Loosen two nuts on cable (148) and

remove from bracket.

7. At the ground drive pump, remove locknut (3) and

ball joint (40) from ground drive pump. Remove ball

joint from cable and save if not replacing. Loosen

two nuts on cable (148) and remove from bracket

(62).

8. Install new cable (148) as old cable is removed to

follow same route through frame.

ti24916a

ti19163a

ti19128a

ti19699a

148

ti19700a

148