User's Manual

Control Board, Toggle Switches and Display Replacement

3A2593B Repair 27

5. Feed toggle switches through control panel and

install two toggle switch nuts.

6. Install Fuse, see page 29. Check control, switches

and display.

7. Install splash shield with two screws.

8. Install control shroud with six screws.

9. Install pad and tighten four screws.

10. Install front shield and tighten six screws.

11. Install tank, lid and siphon tube.

12. If control board was replaced, calibrate distance

sensor (see Operation manual).

ti19691a

ti19705a

ti19098a

ti19171a

ti19200a

ti24917a