User's Manual

Clutch Replacement

3A2593B Repair 21

Installation

1. Install spacer (56) and key (60) onto crankshaft.

Slide clutch (57) onto crankshaft.

2. Align clutch and wire in bracket.

3. Install heavy washer (58) and bolt (59) onto crank-

shaft. Torque bolt to 45 +/- 5 ft-lb (61 +/- 7 N•m).

Use screwdriver in recoil starter cup to hold crank-

shaft.

4. Install pulley (61) and torque three screws (81) to 10

ft-lb (13 N•m).

5. Install recoil starter onto engine.

6. Connect clutch to wire harness.

7. Install ground drive pump assembly with tensioning

and two hold-down bolts.

8. Install and tension Oil Reservoir Belt (page 11)

and Ground Drive Belt (page 10).

ti19214a

ti19211a

ti19692a

ti19216a

ti19704a

ti19212a

ti19908a