User's Manual

Hydraulic Gun Manifold Replacement
16 3A2593B Repair
Hydraulic Gun Manifold
Replacement
Removal
1. Remove tank lid and siphon tube.
2. Remove tank from unit.
3. Remove six screws from front shield.
4. Remove front shield from unit.
5. Loosen four screws and remove pad.
6. Label wire harnesses GUN 1 and GUN 2. Discon-
nect two wire harnesses from solenoids.
7. Label gun cables Gun 1 and Gun 2. Disconnect gun
cables from actuators.
8. Use a needle-nose pliers to remove gun cables from
bracket.
9. Use wrench to disconnect manifold tubes by the
paint pump. NOTE: Oil will spill. Use a rag to con-
tain the oil.
ti24196a
ti24916a
ti19163a
ti19164a
ti19161a
Gun 2
Gun 1
ti19159a
Gun #
ti19667a
ti19160a