User's Manual

Ground Drive Belt Replacement
10 3A2593B Repair
Ground Drive Belt
Replacement
Removal
1. Loosen four screws and remove belt cover.
2. Loosen two hold-down bolts.
3. Loosen tension bolt to bring two pulleys closer
together to create slack in the belt.
4. Remove belt.
Installation
1. Install belt onto pulleys.
2. Tighten tensioning bolt to move two pulleys apart
and tighten belt to proper tension (see table).
3. Install mounting plate and tighten two hold-down
bolts.
4. Replace belt cover and tighten four screws.
ti19128a
ti19130a
ti19131a
ti19133a
Ground Drive Belt
Tension Recommendations
New Belt
Tension 53 +/- 2 Lbf (236 +/- 9 N)
Frequency 167 +/- 3 Hz
Used Belt
Tension 45 +/- 2 Lbf (200 +/- 9 N)
Frequency 155 +/- 3 Hz
Gates Sonic Tension Meter
Settings: M = MASS = 85 g/m
W = # of belts = 1
S = Span = 157 mm
ti19134a
ti19132a
ti19129a
ti19128a