User's Manual

Installation
8. Place a wrench on the flats of the air adjustment
valve housing and unscrew the valve from the
gun.
9. Screw the new air adjustment valve (30) into the
gun, using a wrench on the flats of the valve
housing. Torque to 15 in-lb (1.7 N•m).
Figure 2 Fan Air Adjustment Valve
10. Place a wrench on the flats of the atomizing air
restrictor valve housing and unscrew the valve
from the gun.
11. Screw the new atomizing air restrictor valve (29)
intothegun,usingawrenchontheflatsofthe
valve housing. Torque to 15 in-lb (1.7 N•m).
Figure 3 Atomizing Air Restrictor Valve
12. Test the gun resistance as instructed in your gun
manual.
3A2498A 3