User's Manual

Troubleshooting
48 3A2347T
Static shock
when touching
shaker or
adhesive bin.
Ground wire not in
place on shaker
assembly. Some adhe-
sives, flow rates, and
ambient conditions can
cause excessive static
buildup on the shaker
tube.
Attach a ground wire from the shaft of the shaker unit to a true earth
ground. Order shaker grounding kit 24R708.
Adhesive not
dispensing at
the correct
time.
Guns opening at the
wrong time.
InvisiPac system does not control the opening and closing of the guns.
The separate controller needs to be adjusted. Consult control manufac-
turer or qualified electrician.
Problem Cause Solution