User's Manual

Setup

20 3A2347T

6. Attach insulated ferrules to the end of each wire. 7. Connect ground wire to chassis ground (AF). See

. 14.

8. Connect L1, L2, L3, and N as shown in F

. 15. Not

all models use all 4 wires.

9. Use zip ties to secure the electrical cord to the

tie-downs located on the top of the inside of the

electrical enclosure.

10. Tighten screw-terminals to at least 10 in-lb

(1.1 N•m).

11. Install electrical enclosure door.

12. Perform Select ADM Settings on page 21 prior to

turning on heat.

. 14

ti20907b

106

. 15