User's Manual

2 3A2100C
Part Number
Use the Part Number Key provided below to identify each system component. The Code for each Option that makes up the Part
Number are provided in the tables below. For example, MBB1DE is a Modular Box; 6 pint reservoir, (maximum of 3 pumping sta-
tions and no motor mount base); 3/16 suction fed pump; 3 pumps; and a direct end rotary drive.
NOTE: Some pump configurations are not available. Contact Graco Customer Service or your local Graco distributor for assis-
tance.
MB = Identifies pump as Graco MB part
Option A: Reservoir Size and Motor Mount Base
Option B: GBL7500 Pump and Level Controller
Option C: Pump Quantity
Option D: Drive Type
◆ Configurations containing these selections from both
Option B and Option D are CE and Atex certified.
Part Key: MB
A-B -C-D
Part Example: MB
B-1 -D-E
Code
Reservoir Size:
pints (liters)
Max Number
of Pump
Stations
Motor Mount
Base
A 4 (1.89) 2 NA
B 6 (2.84) 3 NA
C 8 (3.79) 5 NA
D 12 (5.68) 8 NA
E 16 (7.57) 12 NA
F 24 (11.36) 16 NA
G 32 (15.14) 20 NA
H 40 (18.93) 24 NA
J 4 (1.89) 2 X
K 6 (2.84) 3 X
L 8 (3.79) 5 X
M 12 (5.68) 8 X
N 16 (7.57) 12 X
P 24 (11.36) 16 X
R 32 (15.14) 20 X
S 40 (18.93) 24 X
Code
Description
0◆ No Pump
1◆ 3/16 Suction Fed Pump
2◆ 1/4 Suction Fed Pump
3◆ 3/8 Suction Fed Pump
4 3/16 Suction Fed Pump with RENS Level Controller
5 1/4 Suction Fed Pump with RENS Level Controller
6 3/8 Suction Fed Pump with RENS Level Controller
7
3/16 Suction Fed Pump with GARZO Level Controller
(Class 1, Group D)
8
1/4 Suction Fed Pump with GARZO Level Controller
(Class 1, Group D)
9
3/8 Suction Fed Pump with GARZO Level Controller
(Class 1, Group D)
Code Quantity Code Quantity
A0N12
B1P13
C2R14
D3S15
E4T16
F5U17
G6V18
H7W19
J8X20
K9Y21
L10Z22
M11
Code Description
Drive Side
Left Right
A◆ Direct end rotary X
B
End ratchet (w/out drive arm) - 800 rpm max
input
X
C End rotary ratchet 37.5:1 - 800 rpm max input X
D End rotary ratchet, 75:1 - 800 rpm max input X
E◆ Direct end rotary X
F
End ratchet (w/out drive arm) - 800 rpm max
input
X
G End rotary ratchet 37.5:1 - 800 rpm max input X
H End rotary ratchet, 75:1 - 800 rpm max input X
J Double reduction end rotary, 25:1 X
K Double reduction end rotary, 50:1 X
L Double reduction end rotary, 100:1 X
M Double reduction end rotary, 200:1 X
N Double reduction end rotary, 400:1 X
P Right angle rotary 25:1 X
R Right angle rotary 50:1 X
S Right angle rotary 188:1 X
T Right angle rotary 375:1 X
U 100:1 ratio gear reducer X
V 150:1 ratio gear reducer X
W 200:1 ratio gear reducer X
X 300:1 ratio gear reducer X
Y 400:1 ratio gear reducer X
Z Left angle rotary 188:1 X
II 2 G
cT6