User's Manual

Setup
28 3A2091C
Install Simple Guide System
1. Locate an area on the vehicle to mount the Simple
Guide System that will allow the user to see the indi-
cator rod from the driving position or with the help of
the RoadView Camera System.
2. If needed, drill two 9/16 in. holes in the desired loca-
tion.
3. Assemble mounting bracket (355) to desired loca-
tion with bolt (359), washer (360), and nut (361).
4. Hand tighten lock bar (6) to mounting bracket (355)
with bolts (357) and nuts (358).
5. Slide support bar (351) through brackets (355) and
tighten fasteners to secure in place.
6. Assemble extension clamp to support bar.
7. Insert indicator rod (362) into guide extension arm
(352) and secure in place with knob(354).
8. Adjust the indicator rod by loosening extension
clamps and sliding the guide extension arm (352) to
desired position. Secure by tightening knob (354).
Install and Align RoadView Camera System
(Optional)
See RoadView Camera System manual.
ti16408a
ti16927a
361
360
355
359
ti16926a
357
6
358
ti17000a
355
351
ti16925a