User's Manual

Installation
Installation
Overview
The purpose o
f the Informer Display Control Module
is to collect
and display fluid data. The Informer
connects the
output signal from a meter to a display
module that
performs the following functions:
• Shows real-time fluid flow rate.
• Displays a resettable batch totalizer.
• Monitors and reports overall fluid use.
• Alarms if the flow rate is too fast or too slow for
the user-set targets.
• Alarms when the maintenance total is reached for
the user-set target.
• Displays a log of the last 20 alarms.
The Informer
is available in configurations for
Hazardous Lo
cation or Non-Hazardous Location
installatio
n. The power supply for Hazardous
Locations c
omes with one barrier, to power one
Informer. U
p to three additional barriers can be
addedtothe
power supply to power three additional
Informers.
See Accessories, page 33,toorder
additiona
l barriers and Informer Modules.
8 3A2040E