User's Manual

Setup Screens
SetupScreen2
Use this screen to set your flow rate maximum and
minimum values and to select units for flow rate.
Figure 7 Setup Screen 2
Key
Enter the screen to set or change
preferences.
Presstoactivateafieldforeditingorto
accept the highlighted selection on a
dropdown menu.
Move to the right when editing number
fields. Press again to accept the entry
when all digits are correct.
Set your desired flow rate maximum
(first data field) and minimum (second
data field) threshold values. See Setup
Screen 3 to set or disable the flow rate
alarms.
Flow Rate Units - Select from the
following drop down options.
Cubi
c centimeters per minute
Liters per minute
Gallons per minute
Exit data editing.
Move between Setup Screens, fields on
a screen, or to increment/decrement the
digits when editing number fields.
Setup Screen 3
Use this scree
n to set your alarm preferences. Select
to enable the alarm, or leave the box empty to
disable the alarm.
Figure 8 S
etup Screen 3
Key
Enter the screen to set or change
preferences.
Press to toggle between and blank.
Maintenance Totalizer Alarm Enable
Flow Rate Alarm Enable
Alarm
Auto Clear Enable. If enabled,
when t
he flow rate returns to within the
flow li
mit set points, the flow rate alarm
will c
lear on any attached accessories,
such
as a the light tower. The alarm will
stil
l be displayed on the Informer screen.
Set d
isplay backlight timer. Enter “00” to
set t
he backlight to remain on.
Exit data editing.
Move between Setup Screens, fields on
a screen, or to increment/decrement the
digits when editing number fields.
26 3A2040E