User's Manual

Run Screens
Run Screens
When in Run Mod
e, the Informer displays the current
flow rate and b
atch total on Screen 1. Screen 2
displays the
grand total for the flow meter to which it
is connected
. Screens 3–6 display a log of the last
20 alarms.
Run Screen 1
Use this sc
reen to view the current batch total and
flow rate, o
r to reset the batch totalizer to 0. Units are
set on Setu
pScreen1andSetupScreen2.
Figure 2 Run Screen 1
Key
Enter the screen.
Batch Totalizer - Displays the amount
of fluid measured since the last time the
field was reset to zero.
Flow Rate - Displays the current flow
rate.
Rese
t Batch Totalizer - resets the batch
tota
lizer to zero.
Mov
e between Run Screens.
Run Screen 2
Use this screen to view the grand total flow for the
system. The grand total cannot be reset.
Figure 3 Run Screen 2
Key
Grand Totalizer - Displays the grand
total flow for the system. This value
cannot be reset.
Move between Run Screens.
3A2040E 23