User's Manual

Installation

10 3A1973B

Air Exhaust Ventilation

The air exhaust port is 3/8 npt(f). Do not restrict the air

exhaust port. Excessive exhaust restriction can cause

erratic pump operation.

To provide a remote exhaust:

1. Remove the muffler (P) from the pump air exhaust

port.

2. Install a grounded air exhaust hose (T) and connect

the muffler (P) to the other end of the hose. The

minimum size for the air exhaust hose is 3/8 in.

(9.5 mm) ID. If a hose longer than 15 ft (4.57 m) is

required, use a larger diameter hose. Avoid sharp

bends or kinks in the hose.

3. Place a container (U) at the end of the air exhaust

line to catch fluid in case a diaphragm ruptures. See

IG. 4.

IG. 4: Venting Exhaust Air

To avoid serious injury from explosion or hazardous

fluids:

• ensure the system is properly ventilated for your

type of installation.

• vent the exhaust away from people, animals, food

handling areas, and all sources of ignition

• place an appropriate container at the end of the air

exhaust line to catch fluid. If a diaphragm ruptures,

fluid will exhaust with the air. See F

IG. 4.

Key:

A Air supply line

B Bleed-type master air valve

(required for pump)

C Air regulator

D Air line quick disconnect

E Master air valve (for accessories)

PMuffler

T Grounded air exhaust hose

U Container for remote air exhaust

ti17648a