User's Manual

Installation and Setup
3A1898B 9
Remote Mounting Installations
• Installations up to 3 ft away from the lubri-
cation point can be mounted with flexible
tubes and a bracket. Refer to F
IG. 5, FIG. 6
and F
IG. 7 for examples of correct remote
mounting installations.
• Remote installations require a grease line.
Graco recommends using a tube with an
inside diameter of at least 6 mm (1/4 inch).
1. Select a position for the lubricator that is
easy to access and protected from
high-pressure water jets, falling materials,
corrosive chemicals and extreme tempera-
tures. Temperature must be below +60°C
(+140°F).
2. Prime the grease line and all accessories
with the same grease that is contained in
the lubricator.
3. Secure grease lines with ties or similar
means.
Direct Mounting
Reducer (optional)
A Lubrication Canister
B Reducer
FIG. 5
A
B