User's Manual

Installation
3A1657F 11
12. Connect the other end of the hose to the fluid mani-
fold as shown in F
IG. 18.
13. Connect material return line to the open port of the
tee fitting at the tank. See F
IG. 17.
14. Repeat steps 9-12 for the other material side.
15. Re-install blue plastic shield that covers the center
of the pumpline.
16. Re-connect material hoses to the HFR system.
NOTE: Keep blank orifices and o-rings (items 7, 8, 9 in
this kit) for flow meter calibration.
FIG. 18: Connect Hose to Fluid Manifold
ti17020a