User's Manual

Installation
8 3A1657F
NVH Flow Meters
1. Perform HFR for NVH Pressure Relief Procedure.
See HFR for NVH operation manual for detailed
instructions.
2. Perform dispense valve Pressure Relief Proce-
dure. See dispense valve manual, page 3, for
detailed instructions.
3. Verify all air, hydraulic, and material pressures have
been relieved before continuing.
4. Perform HFR for NVH Shutdown procedure. See
HFR operation manual for detailed instructions.
5. Remove all fittings from the inlet and outlet ports on
the front of the fluid manifold. See F
IG. 9.
6. If applicable, connect the A (Red) and B (Blue)
return fittings. See F
IG. 10.
7. Connect A (Red) flow meter and fittings to fluid
manifold. See F
IG. 11.
FIG. 9: Remove Fluid Manifold Fittings
FIG. 10: Connect Return Fittings
FIG. 11: A (Red) Flow Meter Installation