User's Manual

Calibration
3A1657F 13
Parts and Tools Required
GX-7DI Only
• 5/16 Nut Driver
• Adjustable Wrench
•Scale
• Two large containers with lids (a hole will need to be
cut into the lid slightly larger than the spray nozzle.
Using a 5 gallon pail and removing the pull out spout
from the bung is recommended).
• Solvent and cleaning utensils to clean GX-7 mix
module and inlets.
L-Head, S-Head, GX-16
• Blocked orifice -- see dispense valve manual for part
numbers, see Related Manuals on page 3
•Scale
• Container to catch dispensed material
• L-Head Only --
• 4 mm and 6 mm hex keys
• S-Head Only --
• 5/32 hex key
• 1 in. hex wrench
• 3/8 in. hex wrench
• GX-16 Only --
• 7/16 in. hex wrench
• Blocked orifice -- see dispense valve manual for
part numbers, see Related Manuals on page 3
Fusion, EP, Probler P2
•Scale
• Two containers to catch dispensed material
• Adjustable wrench
• Fusion Gun and EP Gun Only --
• Ratio checking assembly 24F227
• Probler P2 Only --
• Calibration kit 24J326
MD2 Valve
• Ratio Check Adapter:
Part No. 255247 for 1:1 MD2 Valves
Part No. 255245 for 10:1 MD2 Valves
• Adjustable Wrench
•Scale
• Two small containers, must have a small enough rim
to separately catch each material dispensed from
the ratio check adapter