User's Manual

Setup

14 3A1602G

Connect Fluid Hoses

Connect fluid supply hoses to outlet hose connections

IG. 9 and FIG. 10). Red hoses for component A (ISO),

blue for component B (RES). Fittings are sized to pre-

vent connection errors. Connect other end of hoses to A

and B inputs of gun.

NOTE: If using the Recirculation Hose Kit 24M654, con-

nect hoses to Recirculation Gun Manifold Kit 249523.

See F

IG. 10.

Connect Gun to Air Hose

(Air Operated Guns Only)

Connect gun air hose to the gun air input and to the air

filter outlet. If you are using more than one hose bundle,

join the air hoses with the nipple provided with the hose

bundle.

Connect Main Air Supply

NOTE: The Reactor E-8p requires 4 scfm

(0.112 m

/min) compressed air for the air operated

spray guns to work correctly.

Connect the main air supply to the quick disconnect fit-

ting on the unit. The air supply hose must be at least

5/16 in. (8 mm) ID up to 50 ft (15 m) or 3/8 in. (10 mm)

ID up to 100 ft (30 m).

Flush Before Using Equipment

The equipment was tested with lightweight oil, which is

left in the fluid passages to protect parts. To avoid con-

taminating your fluid with oil, flush the equipment with a

compatible solvent before using the equipment. See

Flushing, page 22.

FIG. 9: Hose and Air Connections

A (ISO)

B (RES)

A (ISO)

B (RES)

Air

Compressed

Air Line

ti17122a