User's Manual

Setup

12 3A1602G

Lock/Unlock Handle

Lock the handle when the sprayer is moved, laid on its

side, or turned upside down.

Unlock

To unlock the handle, remove lanyard and locking pin

from cart handle. Pull on handle to extend cart handle

and move sprayer.

Lock

To lock the handle, press down handle pins and slide

cart handle through tubes. Insert pin through cart han-

dle and lock with lanyard.

Install 38 mm Spout Adapter

The sprayer is supplied with a 40 mm spout adapter.

Install 38 mm spout adapters if necessary.

1. Loosen containment knob.

2. Remove suction tube caps and place in containment

tray.

3. For installation instructions, see Spout Adapter,

page 40.

Install Desiccant Dryers

1. Use needle nose pliers to remove two plugs (P)

from the dryer (73).

2. Remove plug from adapter housing (57).

3. Screw the dryer into the adapter housing (57) hand-

tight only. Do not overtighten.

FIG. 3

FIG. 4

ti17513a

ti17514a

FIG. 5: Spout Adapters

FIG. 6: Desiccant Dryer Installation

ti18063a

Black

Silver

40 mm

38 mm

ti17475a