User's Manual

33 Gallon Paint Tank Kit (24G769)
6 3A1302D
If Installing to RoadPak
Accessory Frame:
1. Place paint tank bracket (1) into position on frame.
2. Install three bolts (9) and washers (7) on bottom of
support bracket (1). Thread nuts (8) onto bolts and
torque to 15 ft-lb (20.3 N•m).
3. Install six bolts (6) and washer (7) to secure sleeve
bracket (2) and support bracket (1) to the accessory
frame. Thread nuts (8) onto bolts and torque to 15
ft-lb (20.3 N•m).
4. Insert paint tank (3) into sleeve bracket.
5. Secure paint tank with tie-down straps.
6. Insert suction tube (with strainer removed) through
top grommet (5).
NOTE: Optional Bottom Feed Fittings Kit 24J149 is
available for paint tank.
7. Connect strainer onto suction set. Strainer should
be about 1/2 in. from bottom of suction set.
1
8
ti17193a
7
ti17194a
6
7
8
ti17190a
ti17197a
ti17191a
ti16553a
1/2 in.