User's Manual

3A1161A

ENG

Installation - Parts

Foot Switch Kit

For use with SmartWare

™

Shot Dispense kits. Enables the operator to trigger the dispense

valve using a foot pedal. For professional use only.

Not for use in explosive atmospheres.

Part 262530

Important Safety Instructions

Read all warnings and instructions in this

manual and the SmartWare Shot Dispense Kit

Instructions-Parts manual. Save all instructions.

r_262530_3A1161_machine_side

Parts

Ref. Description Qty.

1 GUARD, foot switch 1

2SWITCH, foot 1

3 CABLE, assy. 1

PAGE 1
Installation - Parts Foot Switch Kit 3A1161A ENG For use with SmartWare™ Shot Dispense kits. Enables the operator to trigger the dispense valve using a foot pedal. For professional use only. Not for use in explosive atmospheres. Part 262530 Important Safety Instructions Read all warnings and instructions in this manual and the SmartWare Shot Dispense Kit Instructions-Parts manual. Save all instructions. Parts Ref. 1 2 3 Description GUARD, foot switch SWITCH, foot CABLE, assy. 1 Qty.
PAGE 2
Installation Operation 1. Remove electronics subassembly cover from the supply system or pump system. See the SmartWare Shot Dispense Kit Instructions-Parts manual for operation instructions. 2. Connect the cable (3) from the foot switch assembly to the number 2 side (start/stop) of the Y-adpater. The Y-adapter is connected to connection 5 on the breakout module. Connection 5 3. Reinstall the electronics subassembly cover.